Gigaset Repeater HX

Before starting the connection to the router, place the Gigaset Repeater HX in the direct vicinity of the router and a mains supply. If you are already using a Gigaset Repeater HX, this must be situated close to the router and switched on for the connection to be established.

Proceed as follows:

1. Connect the network device to a power socket.
2. Connect the cable to the repeater – the repeater will remain in connection mode for approximately 5 minutes (left LED flashes).
3. During this time, hold down the + button on the Internet-Box for 1 second.
4. Once the repeater LED shows a steady green light, it is connected to the router.

The left LED indicates the connection status and ready status.

If not yet connected

In operation

The right LED indicates the handset connection over the repeater.